Cold Logic

EnviroTemp – Energy and Performance Solutions

The EnviroTemp team have extensive knowledge and expertise in providing significant energy and performance solutions for a wide range of business and industry across the energy hub of Air Conditioning, Refrigeration and Chillers.

EnviroTemp understands the importance of Air Conditioning, Refrigeration and Chillers and its associated energy costs for users across a wide range of business and industry.

That’s why EnviroTemp’s proprietary refrigerant side energy solutions are providing customers across the globe with additional energy savings and improved plant efficiency

  • EnviroTemp is complimentary to ALL other HVAC base energy savings solutions.
  • By using EnviroTemp you can further reduce energy consumption and your carbon footprint on top of what you are already achieving.
  • If you are not using EnviroTemp, you are leaving additional energy savings on the table and missing out on further carbon reduction

From day 1, every commercial grade air conditioning system, chiller and refrigeration unit begins losing HEAT-TRANSFER efficiency

Efficiency losses translate into:

  • Deteriorating C.O.P.
  • Increased energy consumption
  • Struggle to achieve set-points
  • Reduced ability to maintain comfort
  • Greater wear & tear
  • Higher running costs

Ashrae state these efficiency losses are due to the effects of “oil fouling”. OIL FOULING is the accumulation of unwanted oil deposits in the coil system of the condenser & evaporator during the refrigeration process of all oil-based HVAC units.

Refrigerant oil is non-conductive (o.94), as oil fouling grows over the systems life, the non-conductive material creates a laminar friction causing the refrigerant to travel like a bullet with a sharp point.

OIL FOULING EFFECTS EVERY PIECE OF Refrigerated equipment, reverse cycle air conditioning, chillers & refrigeration typical system will lose:

  • 5% THE NEXT YEAR &
  • MAXIMUM EFFICIENCY LOSS can be up to 20-30%,
  • Can cost you 20-30% more in energy use,
  • Cause more frequent breakdowns,
  • Reduced life span.

Envirotemp is a highly thermo-conductive oil based product that is added DIRECTLY to the existing lubricating oil, EnviroTemp will remove the stagnant layer of fouled oil.

Benefits of an EnviroTemp Treated System:

  • Energy Reduction & C.O.P improvement between 8 – 12%, can be as high as 18%
  • Improved Capacity
  • Better C.O.P
  • Reduced Maintenance Costs
  • Prevention for the future
  • Minimal Ongoing Costs
  • Restores Lost Efficiency
  • Improved Comfort
  • Environmentally Friendly
  • Supported by 100’s of thousands of users worldwide
  • Rapid ROI

Improves performance in:

  • Flooded & Non-Flooded Systems
  • Centrifugal
  • Screw
  • Reciprocating
  • Dx Type & All Refrigerants

Unless you are using EnviroTemp, you are more than likely losing 8-10% energy from HVAC operations. Imagine what that works out to on a per-day-basis! EnrviroTemp is your solution!